How To Build Dog Stairs For Bed

Author: admin | Categories: Dog Beds comments
Popular Dog Stairs For Bed

Dog stairs for bed – Dogs naturally rest in packs and usually welcome the opportunity to share a bed with their owners. Smaller, elderly or disabled dogs, however, may not be able to jump or out of a bed and can injure itself in an attempt to. Trying to bending and lifting of a dog on a bed can cause pain for the owner. A small step can help your dog on the bed safely and easily.

Build dog stairs for bed, cut an 8-by-12 rectangle from the two side pieces, using a handsaw. Sand all the pieces of wood to make them slippery. Mount the stairs to make sure the pieces fit well together. Place the two sides, the long-side down, on a flat surface to 30 centimeters apart. Place the risers in place on the two side pieces, perpendicular to the ground. Place the wires in place over the two side pieces, parallel to the ground. Place it back in place on the back of the side pieces. Highlights no irregularities, and saw or sand the boards if necessary to correct dimensions.

Dog stairs for bed, Glue the planks in place with wood glue and allow drying. Mark the position of the screws once the staircase pieces fit together, drill 5/8 inch screw holes by these markers. Brush stain or primer, and then paint on the steps to improve their appearance and to protect the stairs from moisture. Allow to dry the stain or paint before proceeding. a rectangle of carpet on each tread and stapling in place. The carpet will provide traction, making your pet from slipping on the stairs.

Comments are closed.