Making A Collapsible Desk With Hinged

Author: Beverly A. Douglas | Categories: Convertible Desk comments
Simple Collapsible Desk

A basic collapsible desk is useful for events and functions that require temporary table space. When not in use, can be stored in a small space until needed again. The surface of collapsible desk can be decorated as you like, or you can leave it unfinished if your appearance is not important. Cut a sheet of plywood 3/4-inch in a rectangle the size you want for the tabletop with a saw. Cut the plywood into two, creating two equal panels. For example, a 3 per 8 foot table top would become two panels 3-by-4-foot. Place the panels on the floor with cut ends butt against each other.

Place 2 inches revolve around the court, with a wing on each piece. Screw the hinges to the plywood with wood screws 3/4 inches. The thickness of the wings will prevent the screws penetrate the surface of the collapsible desk. Place a threaded flange 1 inch at each corner of the table, place one inch from the corner. Place the flanges at the table with wood screws 3/4 inches. Tubes threaded screw four in the four tabs. The pipes should be all the time you want the table to be high. Set the table on its legs.

Comments are closed.